Jump to content
LCVG

The Retro Gaming bug


Romier S
 Share

Recommended Posts

Nice-I've been using the Oculus to get a light gun fix recently, but I've thought about going back and adding an aimtrak to my mame, since the old light gun I have for it never worked quite right.  Main games I miss for it are Area 51 and Point Blank (which had decent Ps1 ports), but the arcade versions are better. 

Link to comment
Share on other sites

  • 3 weeks later...

Finally completed the video processing family with the addition of the OSSC along with a few pickups I got lucky on. 
 

4D88E7BD-EBE0-488A-B217-90F95C6983E7.jpeg
 

E76FF394-FE36-4907-B630-D0B32CB7A772.jpeg

 

8F000284-3972-4328-999E-31864181AD6E.jpeg

 

Mystical Ninja was $50 and I managed to get FFIII CIB for $80.

 

Ninja didn’t have the manual but I found a loose original manual on EBay for $9 bucks.:)

 

The House or the Dead continues my streak of light fun game acquisitions. Japanese version was $20. The US release goes for stupid money and the Japanese release is the exact damned game. 

 

Link to comment
Share on other sites

  • 3 weeks later...

So this will be here next week. I looked at a possible 20inch PVM but getting one for less than $500 isn't easy and considering this is getting shipped, I really wanted to get my feet wet a bit cheaper and the 14M4U is a great unit to do that. It's an 800 line PVM from Sony and this is the literal unit I bought. It's in great shape and I can't wait to get some play time with it! If its as good as I'm hoping, I will probably flip it and end up with the 20M4U instead down the line. Or if the gods allow the 20L5 which goes for insane money.:)

 

s-l1600.jpg

 

s-l1600.jpg

 

s-l1600.jpg

 

 

Link to comment
Share on other sites

  • 2 weeks later...

This was great:

 

 

Question on fixing my Super Nintendo controllers: The wires for mine are fraying right where they come out of the top. I'm sure it's due to wrapping the cord around the controller over the years. Is there a good place to get replacement parts for this and do you know if it's repairable without soldering or anything?

 

Link to comment
Share on other sites

SNES controllers are so cheap Cam. I'm not sure its worth bothering to fix, frankly.

 

On the bad news front, the PVM came today. It did not make the journey unscathed. The picture tube itself separated from the bezel which likely means the plastic pieces that hold the screen in place on the bezel itself are busted. Poor packaging sucks! I tried to power on the monitor earlier and got nothing which was even more disappointing but after fiddling I was able to get the CRT connected properly to the neck board and voila, I have a working PVM!

 

I've already contacted the seller though and will be discussing outright return or a heavy discount allowing me to source a new bezel and completely swap it out and remount the screen (which is labor intensive but doable). I wouldn't mind knocking $100 bucks off the cost and keeping it (I will have paid $140 for the monitor when it was all said and done).

 

Despite this, I did sell off my extra OLED today and came across this bad boy:

 

s-l1600.jpg 

 

s-l1600.jpg 

 

s-l1600.jpg 

 

Only 16k hours logged on a 20+ year old BVM is incredible. You're luck to find units sub-30k hours. This is an 800 line screen as well but even higher quality as a broadcast video monitor Sony produced. I am driving to Maryland to pick it up tomorrow. There will be no shipping mishaps!

 

I did get a chance to play around with the 14M4U tonight and good christ, I'm a CRT convert. It's absolutely amazing that a nearly 25 year old 14in screen completely destroys $400 scalers and high end flat panels for retro games even up to the PS2/GC/Xbox era. 240p content is mind blowing enough but I put in Silent Hill 3 (which I'm playing through right now on my flat panel via the Framemeister) and good god. 480i belongs on a damned high end CRT. I can't get either the OSSC or even the vaunted FM (which is known for its amazing deinterlacing quality) to come anywhere near the PQ of this little monitor. I would post screenshots but they legit would do the unit no justice. Though I will post up a few 240p shots even if they also don't convey how utterly sharp and crisp this little units PQ is. Oh and did I mention the black levels? Goodness....

 

31872E20-323B-41F6-BFB2-505F72063724.jpeg

 

983781A3-DAF0-4312-B041-AE3EAA31724A.jpeg

 

840A5775-3332-407E-8510-18808CD94408.jpeg

 

E63E150B-A3E9-43BF-81C0-BB97309B9806.jpeg

 

If anything is readily apparent, its that both of these monitors will eventually be flipped for a 20in for sure. I have the seen the glory of high end CRT's and there can be no turning back.

 

 

Link to comment
Share on other sites

  • 2 weeks later...
1 hour ago, Starhawk said:

Might try and keep an eye out for one of these:

 

 

Also learned of the OfferUp app for the first time from this video. Ever use that?


The 310 is a ghost. I’ve been looking at multiple sources for it and have only seen one on offer in two years and that one was in Philly for stupid money. I have seen the set in person and it’s lovely but frankly it doesn’t touch a proper PVM/BVM in terms of crispness/sharpness just by nature of the limited lines of horizontal resolution (which usually maxes out at 400-450).

 

I “settled” for the FV300 which is the model right below the 310 and is practically identical except for the lack of the high voltage regulator for my “big” CRT and it produces a wonderful picture.. The regulator is why the 310 is so sought after as it eliminates bloom, color bleed and picture distortion which gives the set a more PVM/BVM look. However, the FV300 cost me $20 bucks while the FV310 will cost much much more and if you’re going to put real money towards a CRT spend it on a quality 800 line PVM/BVM. A 20M4U will run between $500-$700 while the top of the line Sony 20F1U 900 line BVM or the 20L5 PVM can run into the $900-$1200 range but they are also Multi-Format and can handle 480p, 720p and 1080i. The 14L5 is more common and can be had for $450. It’s a great little set!

 

I have two 14’ units and I *love* them but as I said, I want a good 20’ to settle down with. I honestly don’t know if I’d keep the FV300 at that point as 20’ is perfect size wise (smaller screen = better image, IMO) from my seating distance.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...