Sherbz Posted August 2, 2003 Report Share Posted August 2, 2003 I've looked through quite a few tutorials, and I have a basic understanding of what to do. I've located all the relevent jumpers, and I have a DPDT switch. As I understand, you remove the connection between the jumpers, and then solder wires from the jumpers to the switch. I have diagrams showing which jumper goes to which spot on the switch; I'm just not sure about how to remove the connection between jumpers. I believe you have to remove the connection between JP10, and also the one between JP7. Is this correct? There is a little piece with a green spot and 000 across the jumpers, but I'm not sure how to remove it. Thanks in advance for any help. Quote Link to comment Share on other sites More sharing options...
Beer Monkey Posted August 4, 2003 Report Share Posted August 4, 2003 I did this a LONG time ago, and I know there are different models of boards. I just pulled the 'jumpers' off with needlenose pliers, then scraped the space between a bit with a knife. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.